There can be many reasons why you are running out of hot water. The problem could be small or big, and sometimes even serious, that’s why you need to save the number of the best plumber in Forest Hills.
Typical reasons could be heating element issues, broken dip tubes, and sediment build-up. Even leaks can be the reason why you are not able to have any hot water coming out of the water heater.
The crux is to identify the issue and then resolve it. Here, you will find some of the common reasons to run out of hot water, and if you fail to identify the problem on your own, better to leave it to the professional plumber in Franklin Park.
Let the professionals and experts come to your residence, and get into the root cause of the issue, and solve it.
Read on to find out why you may be running out of hot water.
Table of Contents
Water is Coming Out in Spurts of Cold and Hot
If you are getting spurts of both cold and hot water, then the typical reason could be sediment building up. In places that receive hard water, building up of sediments in the water heater’s tank is nothing new. When sediments start to build-up, it will, unfortunately, leave less space for hot water. Not just this, it can also increase your water heater bills.
The solution would be to trying to flushing, followed by draining the tank. You can do it yourself, but professionals will be your best bet. It is recommended to fully drain your water tank once every year. If this doesn’t solve the problem, then you might have to replace the tank.
You Run out of Hot Water After a Short Interval
Most of the water heaters that you see have two heating elements. One will be at the top, and the second one will be at the bottom. The top one keeps on heating water repeatedly. However, the bottom one heats the stored water. This is what it should be doing in an ideal scenario.
When the bottom heating element doesn’t function properly, you will mostly rely on the top element, which is why you keep on getting hot water after a short while. To fix this problem, you will have to call a professional plumber. The expert will fix the issue for you. Mostly, it will be the bottom heating element that will need to be replaced or fixed.
You Only Receive Lukewarm Water
The water heater dip tube’s work is to push the cold water to the tank’s bottom. The tank’s lower element will then heat the stored water available in the lower half of the tank. When the dip tube breaks, it is quite evident that you will start receiving lukewarm water.
What happens, in this case, is that cold water from the bottom gets mixed up with the hot water in the upper tank. Take a look at the sink strainers and showerhead. If you see small chunks of plastic lying there, then the dip tube might have broken. You may replace the dip tube, else call the pros. Dip tubes are easy to replace, and they are super affordable.
Conclusion
If you are dealing with any of the issues, call a professional plumber in Franklin Park who will take care of all the problems and allow you to take a shower in hot water. Always rely on professional plumbers only who know what they are doing. Choose a plumbing company who is here in the industry for a long time. Contact Mr. Rooter Plumbing of Pittsburgh.
