Showers and tubs can get grimy fast if neglected. Unfortunately, many bathroom owners don’t get keen on keeping their bathrooms clean. Some regard cleaning their bathrooms as a science experiment, but that shouldn’t be the case. Showers should always get kept clean because it’s a place where we clean ourselves. Also, cleaning a shower isn’t that hard as many people regard it. You may wonder what if the shower is really dirty. You need not fret; luckily, in this article, tips on how to clean a filthy shower will get discussed. If you want to know, you may need to continue reading.
Table of Contents
A filthy shower could have the following challenges;
- Dingy grout
- Soapy film on tiles and tub
- Clogged showerhead
- Sluggish drain
To clean the above mess in your shower, follow the following tips;
Destroy Mildew and Scum
Mildew survive in moist places. To overcome the issue with mold, ensure that you ventilate your bathroom effectively. Open both the windows and doors. Then divide your shower into three vertical sections and start working on it. Are you wondering why? It will prevent the cleaner from drying on the shower before you get to wipe it. Also, you get to reduce fumes. Start by spraying on the first section after covering both the tub and the tiles. Then allow it to penetrate by leaving it for a few minutes. You can read more about how to clean your bathroom on My Home Zen Spa.
After the time has expired, spray on the second section and leave it to soak while you clean up the first section. Use a wet non-scratching sponge and wipe the surface of the first section using wide strokes. Then rinse your sponge and the cleaned part with clean water. By the time you are finishing the first section, the second section is now ready to clean. First, spray the third section then start cleaning the second part. After finishing cleaning it as you did with the first part, rinse it, and clean the remaining part.
Sometimes with a really dirty shower, the grout stains may remain. In such a case, take a spray bottle and mix two parts of water and a part of bleach in it. Then spray on to the grout stains and allow the solution to sit for a while. After the spots have soaked with the bleach solution, turn on your shower for about a minute to help it self-rinse. Also, to ensure that the grout gets well rinsed, use a cup to splash water on it.
Clearing Your Shower’s Drain
Have you ever stood in a puddle as you take a shower because the drain stopped working? It can be a real downer! But no need to worry; you can fix it. Look for a wire hanger and untwist it. Then slide one of its head into the shower drain and pull out or poke down any obstacle like clumps of hair. To remove all the soap coatings that could also be blocking your shower’s drainage, mix each quarter cup of boiling water and ammonia and pour it inside the drain.
Restore the Spray
Is your showerhead shooting water in all directions? Or maybe the flow is low or none at all. In such a case, your showerhead may be clogged with minerals and require some cleaning. Use a scrubber sponge to wipe all the dry debris found on the holes of your showerhead. If the spraying doesn’t get back to normal, mix a cup each of water and vinegar and pour it inside a plastic bag. Then immerse the showerhead inside the plastic bag and ensure that all the holes get in touch with the solution.
Tie plastic bag securely around the showerhead and allow it to soak for about 15 – 20 minutes. Then remove the plastic bag after time expires and wipe away all the loosened deposits. Put on the hot water of your shower and let it run through the holes. Your shower’s spray will not only be sparkling clean but will ensure you enjoy a good shower.
Cleaning the Walls, Ceilings, and Tiles
Because of our bathroom’s nature of work, keeping them dry is inevitable. It is the reason why most bathrooms are moist. Based on recent statistics, over half of USA homes contain molds. Unfortunately, wet surfaces offer the right environment for breeding molds and harmful bacteria. To avoid such, you need to clean your bathroom’s walls, tiles, and ceiling properly. Then ensure that they stay dry at all times.
Start cleaning by spraying the walls, tiles, and the ceiling with a reliable all-purpose cleaner. Then open your shower’s hot water. Allow it to run for a few minutes until steam builds up. Switch off the hot water and leave the bathroom for about 20 minutes to allow the steam and water to mix. Ensure you close the door after going out of the shower. Then take a clean cloth and wipe all the surfaces. You can use a dry microfiber mop to reach the ceiling. The tiles should be the last to wipe to avoid getting dirty while you clean the surfaces above.
Clean the Toilet
If your shower has a toilet and is filthy dirty, pour a full cup of inside the toilet’s bowl. Then let it sit for some minutes and brush and flush. If you still can see some stains, remove them using a damp pumice stone.
Conclusion
The sight of a dirty shower isn’t pleasing at all. Besides, a filthy shower can be a recipe for disaster. You can slip or fall, causing major pains and harm to yourself. As explained above, it is crucial to keep our showers cleans. A really dirty shower may sound hard to clean, but with the above tips, you can clean any dirty shower effectively. Learn to clean any part of your shower effectively. That way, you will ensure that all sections of your shower get washed effectively. Besides, a clean shower gets free from molds and germs. If you are not sure of how to start cleaning your filthy shower, the tips explained above will help.
Tags: A Really Dirty Shower, Clean, My Home Zen Spa., recent statistics
